According to Regulation: OSHA 29 CFR 1910 1200, Revision Date 10/25/2019 Print Date 8/2/2025 GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA

1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: 4-(methoxymethyl)cyclohexanone
Product Number: AP08878
Company: Aquilapharmatech LLC
Address:8225 Farnsworth Road, Suite A,
Waterville, OH 43566,USA
Telephone: 419-386-2527
Fax: 419-386-2425

2. COMPOSITION/INFORMATION ON INGREDIENTS
CAS RN: 17159-84-1
Chemical Formula: C8H14O2
Molecular Weight: 142.2

3.HAZARDS INFORMATION
Emergency Overview
Irritating to skin, eyes, and respiratory system.
May have harmful effects if inhaled or swallowed.
Avoid prolonged exposure.
Do not breathe vapor.
Use caution when handling.
Exposure to any chemical should limited.
To the best of our knowledge, the health hazards of this material have not been fully investigated.
Material is for research and development purposes only.

OSHA Hazards
Toxic by ingestion. Harmful by skin absorption. Skin sensitizer

InhalationMay be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract
Skin Harmful if absorbed through skin. Causes skin burns.
eyesCauses eye burns.
IngestionToxic if swallowed.

GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Harmful if swallowed (Category 4), H302
Skin irritation (Category 2), H315
GHS Label elements
Pictogram:
Signal word: Warning
Hazard statements
H302: Harmful if swallowed
H315: Causes skin irritation

4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing give artificial respiration Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Continue rinsing eyes during transport to hospital. Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult physician.

5. FIRE-FIGHTING MEASURES
Flammable properties
Flash point no data available
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.

6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods for cleaning up
Pick up and arrange disposal without creating dust. Keep in suitable, closed containers for disposal.

7. HANDLING AND STORAGE
Handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire protection.
Storage
Keep container tightly closed in a dry place in refrigerator (4 degree C).

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Contains no substances with occupational exposure limit values.
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves.
Eye protection
Safety glasses Skin and body protection
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Hygiene measures
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: liquid
Color: colorless
Safety data
Melting point: no data available
Boiling point: no data available
Flash point: no data available
Lower explosion limit: no data available
Upper explosion limit: no data available
Water solubility: soluble

10. STABILITY AND REACTIVITY
Storage stability
Stable under recommended storage conditions.
Conditions to avoid
None
Materials to avoid
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions

11. TOXICOLOGICAL INFORMATION
Sensitization
May cause sensitization by skin contact.
Chronic exposure
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified
Signs and Symptoms of Exposure
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.,
Cough, Shortness of breath, Headache, Nausea
Potential Health Effects
Inhalation May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract.
Skin Harmful if absorbed through skin. Causes skin burns.
Eyes Causes eye burns.
Ingestion Toxic if swallowed. Causes burns.

12. ECOLOGICAL INFORMATION
Elimination information (persistence and degradability)
no data available
Further information on ecology
no data available

13. DISPOSAL CONSIDERATIONS
Product
Observe all federal, state, and local environmental regulations. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

14. TRANSPORT INFORMATION:
This substance is considered to be non-hazardous for transport.
UN-Number
ADR/RID: - IMDG: - IATA:-
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA:
Packaging group
ADR/RID: - IMDG: - IATA:
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no

15. REGULATORY INFORMATION
OSHA Hazards
Toxic by ingestion, Harmful by skin absorption. Skin sensitizer, Corrosive
SARA 302 Components
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.

16. OTHER INFORMATION
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Aquilapharmatech LLC shall not be held liable for any damage resulting from handling or from contact with the above product.